Everybody always gets nostalgic about their last memorable ride. There is no better way to relive the past than having it recorded using a suitable camera. Even then, without a good camera mount for motorcycle, you might not be able to capture the occasion, as you would wish to. That is why it is important to know about the different types of these tools available in market together with their benefits and disadvantages.
Helmet mounts are the most common. These have straps that either surround the dome or are passed through the holes in the helmet. Their universal mounting offers a reliable surface for attachment of cameras. An advantage of these is the reduced vibration and therefore stability of images. The cameras also move with change in position of the head hence they can record different directions the riders will be looking at.
It may however be hard to place the camera to point at the exact position one wants it to. Since it is impossible to monitor them during the recording process, new users may get irritated when after the session they find out that their cameras missed to catch the main thing. If you are patient enough however, you will learn to be more accurate as you use them more and more.
Most straps are also not good for heavier video recorders, which might cause overstretch making them to droop. Anyway, when you get the right equipment and do some practice with them, you will soon improve on accuracy. For those who want full and easy reach to the camera during the recording process, a handle bar mount is the thing to go for.
Suction cup mounts are also preferred by many individuals due to their strong grip when fixed on a clean, non-porous surface. Since they are placed on the fuel tank, they need to have long arms, which enable them to raise camera view away from the bike parts. Their flexibility depends on the number of joints available on the arm. There is rarely a problem with the cup.
You may also go for suction cup mounts. These use a vacuum to maintain a strong grip with a surface. They need a wide and non-porous place like the fuel tank. A good thing about them is their flexibility, you can actually move the camcorder to any direction. They can also support relatively heavy cameras without fear of falling and experience less vibration compared to handle bar mounts.
Even when using a genuine one, double check to ensure that the camera and joint screws are tightened properly. Concisely, motorbike mounts just like other gadgets have their downsides. It is good to be aware of these before you purchase any so as to avoid disappointments. Before using them ascertain that the cameras and any other joints are well secured.
It gets worse if the bar is too long and with many joints. At the same time, the arm should not be too short because this will compromise on the field view-making parts of the bike to boringly appear throughout in your record. Asking the supplier to get you one that is not too short or too tall for your bike will partially help in mitigating these inconveniences.
Helmet mounts are the most common. These have straps that either surround the dome or are passed through the holes in the helmet. Their universal mounting offers a reliable surface for attachment of cameras. An advantage of these is the reduced vibration and therefore stability of images. The cameras also move with change in position of the head hence they can record different directions the riders will be looking at.
It may however be hard to place the camera to point at the exact position one wants it to. Since it is impossible to monitor them during the recording process, new users may get irritated when after the session they find out that their cameras missed to catch the main thing. If you are patient enough however, you will learn to be more accurate as you use them more and more.
Most straps are also not good for heavier video recorders, which might cause overstretch making them to droop. Anyway, when you get the right equipment and do some practice with them, you will soon improve on accuracy. For those who want full and easy reach to the camera during the recording process, a handle bar mount is the thing to go for.
Suction cup mounts are also preferred by many individuals due to their strong grip when fixed on a clean, non-porous surface. Since they are placed on the fuel tank, they need to have long arms, which enable them to raise camera view away from the bike parts. Their flexibility depends on the number of joints available on the arm. There is rarely a problem with the cup.
You may also go for suction cup mounts. These use a vacuum to maintain a strong grip with a surface. They need a wide and non-porous place like the fuel tank. A good thing about them is their flexibility, you can actually move the camcorder to any direction. They can also support relatively heavy cameras without fear of falling and experience less vibration compared to handle bar mounts.
Even when using a genuine one, double check to ensure that the camera and joint screws are tightened properly. Concisely, motorbike mounts just like other gadgets have their downsides. It is good to be aware of these before you purchase any so as to avoid disappointments. Before using them ascertain that the cameras and any other joints are well secured.
It gets worse if the bar is too long and with many joints. At the same time, the arm should not be too short because this will compromise on the field view-making parts of the bike to boringly appear throughout in your record. Asking the supplier to get you one that is not too short or too tall for your bike will partially help in mitigating these inconveniences.
0 коммент.:
Отправить комментарий